Email：cnxh002@xhsteelgroup.com
WhatsApp:+8615562508601
PRODUCT CENTER
Aluminium Pipe can be produced in two types drawn and extruded aluminum pipe.
Extruded aluminum pipe is stocked in both seamless and structural (port-hole die).
Aluminium pipe is used in pressure or structural application.
These Aluminium Pipe are light weight, excellent corrosion resistance, and the ability to transmit heat rapidly are only a few of the benefits of aluminum pipes.
More +
Extruded aluminum pipe is stocked in both seamless and structural (port-hole die).
Aluminium pipe is used in pressure or structural application.
These Aluminium Pipe are light weight, excellent corrosion resistance, and the ability to transmit heat rapidly are only a few of the benefits of aluminum pipes.
1100 aluminum alloy is 99.0% ordinary industrial pure aluminum.
Heat treatment can not be strengthened; Low strength, but good ductility, formability, weldability and corrosion resistance
After anodic oxidation the corrosion resistance can be further improved and a beautiful surface can be obtained.
More +
Heat treatment can not be strengthened; Low strength, but good ductility, formability, weldability and corrosion resistance
After anodic oxidation the corrosion resistance can be further improved and a beautiful surface can be obtained.
The main alloying elements in 6061 alloy are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect.
Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
More +
Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
6082 is a heat-treatable alloy with good formability, weldability, machinability and corrosion resistance.
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
This alloy has similar but not identical mechanical properties to alloy 6061, and its -T6 state has higher mechanical properties.
More +
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
This alloy has similar but not identical mechanical properties to alloy 6061, and its -T6 state has higher mechanical properties.
Office Address
166 Xingfu Town, Boxing County, Binzhou City, Shandong Province, China
